|
|
Build Your Online Product Catalogs?
| Product Name: |
Thermal Night Vision
|
| Supply Ability: |
|
| Related proudcts |
uncooled thermal cam, infrared core, |
| Specifications |
1 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
The thermal imaging night vision car system is mainly used in the dark environment without visible light or low light. The infrared emitting device actively projects the infrared light onto the object, and the infrared light is reflected by the object and enters the lens for imaging. The image is formed by the reflection of infrared light instead of visible light. At this time, you can see the picture that is invisible to the naked eye in the dark environment. Below are two types of our featured thermal night vision camera.
Working Principle of night vision infrared car camera
The infrared night vision technology mainly uses the photoelectric conversion of the infrared light source to perform image processing technology. It is divided into active and passive. Active imaging, the target is illuminated with an infrared searchlight, and the reflected infrared radiation is received to form an image. Passive does not emit infrared light, and relies on the target's own infrared radiation to form a "thermal image", so it is also called "thermal imager". Co***red with the imaging of the two technologies, the active imaging is clear and can identify people, targets, scenes, and so on.
Key Components of Thermal Night Vision Camera
1.Infrared light board
After being energized, the current is transmitted through the PCB circuit board to an infrared wick that converts electrical energy into light energy and thermal energy, and the infrared light device emits infrared light and is projected onto the object.
2.Lens
The lens collects the infrared light reflected by the infrared lamp after being projected onto the object, and is imaged by focusing processing and then transmitted to the photosensitive element (CCD/CMOS) of the camera board.
3.Camera motherboard
The photosensitive component (CCD/CMOS) converts the received infrared light image from light to current signal and transmits it to each working IC electronic component through the PCB circuit board for processing. |
| Company: |
Zhejiang ULIRVISION Technology Co., Ltd.
|
| Contact: |
Mandy fang |
| Address: |
17F Block C,Sunwave Building,581 Huoju Avenue, Binjiang District,Hangzhou 310052,Zhejiang,China |
| Postcode: |
310025 |
| Tel: |
87209887 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
